Are you looking to add another product to your DIY auto-detailing arsenal? Well, look no further than Produxa Scratch and Swirl Remover. This product delivers shine, UV protection, and non-abrasive removal of scratches, swirls, and other blemishes. Here are insider tips for making the best use of this powerful product.
When to Use Produxa Scratch and Swirl Remover
The purpose of this product is to remove shallow knicks and scrapes. These are scratches that are not deep enough to warrant taking your car to a professional, but they are visible enough to be an eyesore.
It is safe to use on all paints. It’s perfect for removing those minor blemishes like water spots, oxidation, swirls, hairline scratches, baked-on bug guts, and other road contaminants. This is a perfect prep product before waxing. A little of this product goes a long way. One bottle can treat up to five mid-sized cars.
How to Use Produxa Scratch and Swirl Remover
Here’s your step-by-step guide for using Produxa’s Scratch and Swirl Remover:
Step 1: Wash your car with Produxa Car Shampoo. Then, dry it off with a microfiber towel. Your car needs to be completely dry for the next step, so this is a perfect time to take a break.
Step 2: Give the Scratch and Swirl Remover bottle a good shake.
Step 3: Apply Scratch and Swirl Remover to one panel of the car. Remember that a little goes a long way. A whole bottle is enough for five cars.
Step 4: Use either a microfiber cloth or a buffer to work the product down to a thin layer, evenly spread across the panel.
Step 5: Finally, use a polishing towel to wipe any excess residue off the car, and move on to the next panel.
Step 6: This step is optional but highly recommended. Enhance the shine by applying Produxa Premium to the entire car.
Best Practices for Produxa Scratch and Swirl Remover
Produxa’s Scratch and Swirl Remover works great with or without using a machine to apply it. Polishing and buffing machines can do a lot of damage if you don’t have the skill it takes to use them. We strongly discourage novices from using machines with this product. A good polishing towel and a little elbow grease can do an awesome job.
Remember to apply the product panel by panel, blemish by blemish. This is definitely a part of life where slow and steady wins the race. You need to evenly spread the product and then polish it away. It’s really hard to do a good job if you’re trying to do too big of a section of your car at once.
Suppose you’re using the Produxa Scratch and Swirl Remover solely for one blemish on one spot of your car. Is it ok to just do a spot treatment, or do you need to apply the product to the whole car? You’re certainly not going to hurt anything by doing a spot treatment, but we recommend doing the whole car. This product is excellent at getting rid of scratches, swirls, and other imperfections, and it also polishes the car, breathing new life into dull paint. The spot that you treat is going to look a lot better than the rest of the car, so you ought to go ahead and give the whole car the VIP treatment while you’re at it.
Produxa Scratch and Swirl Remover is not intended for use on windows or decals. This treatment helps to get rid of blemishes on paint and paint only. This is exclusively for the exterior of the car. Take special care not to get it on surfaces it was not meant for.
Last but not least, remember to keep this great product at room temperature. Refined mineral spirits are some of the active ingredients that make it work so well, and these particles can lose strength in extreme hot and cold temperatures.
Produxa Scratch and Swirl Remover will help you keep your car looking showroom ready at all times. No water spot, swirl mark, or hairline scratch can stand up to this powerful formula.